Version 11.12 Patch

This patch does NOT patch any version 7, 8, 9, 9.50, 10 or 10.5 IRRICAD's to Pro Version 11. If you wish to upgrade from version 7, 8 or Pro version 9, 9.50, 10 or 10.5 to Pro Version 11, please contact your local IRRICAD distributor. You must be running Pro Version 11.04 , 11.06, 11.08 or 11.10 to use this patch.

This patches Pro Version 11.04, 11.06, 11.08 or 11.10 to Pro Version 11.12.

V1112patch

Click on the link to download. Save the file on your hard disk. To install the patch, double click on the exe file (Patch1112.exe) in Windows Explorer. This will be located where you have saved the download to your hard disk. IRRICAD will self-install the patch.

The bug fixes that are added in this patch are described in the following file: Bug Fixes and Additions since Pro Version 11.10.

Version 11 Upgrade

The following installation files are designed to upgrade IRRICAD Pro to Pro Version 11 (see Features available in Pro Version 11). The bug fixes that have been added in this upgrade are described in the following file: Bug Fixes and Additions since Pro Version 10.5.

The new install program is designed to run on Windows XP Service Pack 3, Vista and Windows 7. If you have an older operating system, please contact your local support.

A code change to the IRRICAD dongle is required in order to run IRRICAD Pro v11. Consequently if you have NOT purchased, or are NOT eligible for an upgrade to Pro v11 DO NOT download and install this upgrade. Doing so could make it necessary to re-install your current version of IRRICAD on your computer. Please contact your local distributor if you are unsure of your eligibility or for upgrade pricing.

To request a dongle update, generate a locking code (Start|All Programs|Irricad|Upgrade Dongle) and then Email it to This e-mail address is being protected from spambots. You need JavaScript enabled to view it (or This e-mail address is being protected from spambots. You need JavaScript enabled to view it in N. and S. America), a license update code will then be returned to you. Enter this license code into the “Update License” field of the “Upgrade Dongle” utility. NOTE - Do not install the new version until you have updated your license code successfully or the code sent back will not work. Now simply download and install the new version.

V11Upgrade

Upgrades your current version to Pro Version 11 (into your current IRRICAD folder) and uninstalls any other versions of IRRICAD.

To install Pro Version 11 on a new computer select V11Minimal. This option can also be used if you wish to install in a new folder on the same computer leaving any other installed versions of IRRICAD. DO NOT install this version in an existing IRRICAD folder. If you wish to run this full install into your current folder, uninstall your existing IRRICAD through the Control Panel - Add/Remove Programs before running this install. Note your designs, symbols, plot templates, modified reports will not be removed during uninstalling.

----------------------------------------------

Version 10.5 Upgrade

The following installation files are designed to upgrade IRRICAD Pro to Pro Version 10.5 (see Features available in Pro Version 10.5). The bug fixes that have been added in this upgrade are described in the following file: Bug Fixes and Additions since Pro Version 10.

A code change to the IRRICAD dongle is required in order to run IRRICAD Pro v10.5. Consequently if you have NOT purchased, or are NOT eligible for an upgrade to Pro v10.5 DO NOT download and install this upgrade. Doing so could make it necessary to re-install Pro V10 on your computer. Please contact your local distributor if you are unsure of your eligibility or for upgrade pricing.

The new install program is designed to run on Windows XP Service Pack 3, Vista and Windows 7. If you have an older operating system, please contact your local support.

V1050Upgrade

Upgrades your current version to Pro Version 10.5 (into your current IRRICAD folder) and uninstalls any other versions of IRRICAD.

To install Pro Version 1050 on a new computer select V1050Minimal. This option can also be used if you wish to install in a new folder on the same computer leaving any other installed versions of IRRICAD. DO NOT install this version in an existing IRRICAD folder. If you wish to run this full install into your current folder, uninstall your existing IRRICAD through the Control Panel - Add/Remove Programs before running this install. Note your designs, symbols, plot templates, modified reports will not be removed during uninstalling.

Version 10.62 Patch

This patch does NOT patch any version 7, 8, 9, 9.50 or 10 IRRICAD's to Pro version 10.5. If you wish to upgrade from version 7, 8 or Pro version 9, 9.50 or 10 to Pro Version 10.5, please contact your local IRRICAD distributor. You must be running Pro Version 10.54 or 10.58 to use this patch. If you a running 10.52, please uninstall via Add/Remove Programs in the Control Panel and then download V1050Minimal and install before installing the 10.62 Patch.

This patches Pro Version 10.54 or 10.58 to Pro Version 10.62.

V1062patch

Click on the link to download. Save the file on your hard disk. To install the patch, double click on the exe file (Patch1062.exe) in Windows Explorer. This will be located where you have saved the download to your hard disk. IRRICAD will self-install the patch.

The bug fixes that are added in this patch are described in the following file: Bug Fixes and Additions Since Pro Version 10.58.

----------------------------------------------

Version 10 Upgrade

The following installation files are designed to upgrade IRRICAD Pro to Pro Version 10 (see Features available in Pro Version 10). The bug fixes that have been added in this upgrade are described in the following file: Bug Fixes and Additions since 9.5.

A code change to the IRRICAD dongle is required in order to run IRRICAD Pro v10. Consequently if you have NOT purchased, or are NOT eligible for an upgrade to Pro v10 DO NOT download and install this upgrade. Doing so could make it necessary to re-install Pro V9 on your computer. Please contact your local distributor if you are unsure of your eligibility or for upgrade pricing.

The new install program is designed to run on Windows XP, Vista and Windows 7. If you have an older operating system, please contact your local support.

V10Upgrade

Upgrades your current version to Pro Version 10 (into your current IRRICAD folder) and uninstalls any other versions of IRRICAD.

To install Pro Version 10 on a new computer select V10Minimal. This option can also be used if you wish to install in a new folder on the same computer leaving any other installed versions of IRRICAD. DO NOT install this version in an existing IRRICAD folder. If you wish to run this full install into your current folder, uninstall your existing IRRICAD through the Control Panel - Add/Remove Programs before running this install. Note your designs, symbols, plot templates, modified reports will not be removed during uninstalling.

Version 10.16 Patch

This patch does NOT patch any version 7, 8, 9 or 9.50 IRRICAD's to Pro version 10. If you wish to upgrade from version 7, 8 or Pro version 9 or 9.50 to Pro Version 10, please contact your local IRRICAD distributor. You must be running Pro Version 10 to use this patch.

This patches Pro Version 10 to Pro Version 10.16.

V1016patch

Click on the link to download. Save the file on your hard disk. To install the patch, double click on the exe file (Patch1016.exe) in Windows Explorer. This will be located where you have saved the download to your hard disk. IRRICAD will self-install the patch.

The bug fixes that are added in this patch are described in the following file: Bug Fixes and Additions Since Pro Version 10.14.

----------------------------------------------

Version 9.5 Upgrade

The following installation files are designed to upgrade IRRICAD Pro V9 to Pro version 9.5 (see Features available in 9.50). The bug fixes that have been added in this upgrade are described in the following file: Bug Fixes and Additions since 9.26

A code change to the IRRICAD dongle is required in order to run IRRICAD Pro v9.5. Consequently if you have NOT purchased, or are NOT eligible for an upgrade to Pro v9.5 DO NOT download and install this upgrade. Doing so could make it necessary to re-install Pro V9 on your computer. Please contact your local distributor if you are unsure of your eligibility or for upgrade pricing.

V950Upgrade

Upgrades your current version to Pro V9.5 (into your current IRRICAD folder) and uninstalls any other versions of IRRICAD.

To install Pro Version 9.5 on a new computer select V950Minimal. This option can also be used if you wish to install in a new folder on the same computer leaving any other installed versions of IRRICAD. DO NOT install this version in an existing IRRICAD folder. If you wish to run this full install into your current folder, uninstall your existing IRRICAD through the Control Panel - Add/Remove Programs before running this install. Note your designs, symbols, plot templates, modified reports will not be removed during uninstalling.

Version 9.56 Patch

This patch does NOT patch any version 7 or 8 IRRICAD's to Pro version 9.5. If you wish to upgrade from version 7, 8 or Pro version 9 to Pro Version 9.5, please contact your local IRRICAD distributor. You must be running Pro Version 9.5 to use this patch.

This patches Pro version 9.5 to Pro version 9.56.

V956patch

Click on the link to download. Save the file on your hard disk. To install the patch, double click on the exe file (Patch954.exe) in Windows Explorer. This will be located where you have saved the download to your hard disk. IRRICAD will self-install the patch.

The bug fixes that are added in this patch are described in the following file: Bug Fixes and Additions Since Pro Version 9.54

Version 9 Patches

This patch does NOT patch any version 7 or 8 IRRICAD's to Pro version 9. If you wish to upgrade from version 7 or 8 to Pro version 9, please contact your local IRRICAD distributor.

This patches Pro version 9.xx to Pro version 9.26.

Patch 9.26

Click on the link to download. Save the file on your hard disk. To install the patch, double click on the exe file (Patch9x0.exe) in Windows Explorer. This will be located where you have saved the download to your hard disk. IRRICAD will self-install the patch. Select the folder where IRRICAD Pro version 9 is installed.

The bug fixes that are added in this patch are described in the following file: Bug Fixes and Additions Since 903

Version 8 Patches

This patches version 8.08+ to version 8.15.

Patch 8.15

Click on the 'Patch 8.15' link to download. Save the file on your hard disk. To install the patch, double click on the .exe file (Patch815.exe) in Windows Explorer. This will be located where you have saved the download to your hard disk. IRRICAD will self-install the patch. Select the folder where IRRICAD version 8 is installed.

The bug fixes that are added in this patch are described in the following file: Bug Fixes and Additions Since 808

Version 7 Patches

For older versions please contact your local distributor.