Search found 530 matches

by jovivier
Wed Apr 24, 2019 1:45 pm
Forum: Hydraulic Design
Topic: Tape Block Flows Significant Higher Than SDR
Replies: 1
Views: 8

Re: Tape Block Flows Significant Higher Than SDR

Hi, The usual reasons for the differences are:- - the designed flows are based on the constant and index for the emitter and not the SDR entry. If the emitters are not pressure compensating then a higher pressure will result in a higher block flow. - the SDR entry is incorrect for the emitter spacin...
by jovivier
Thu Apr 18, 2019 4:54 pm
Forum: Support FAQs
Topic: If the Error Report will not Display
Replies: 0
Views: 25

If the Error Report will not Display

Even though the ReportViewer has not changed for many years some anti-virus software appear to think that the Version 17 ReportViewer may be a trojan. We are communicating with the anti-virus software creators to have the ReportViewer executable added to their pattern files and marked as safe. In th...
by jovivier
Wed Apr 17, 2019 2:11 pm
Forum: Reports
Topic: zone design summary
Replies: 2
Views: 87

Re: zone design summary

Hi Hector, I have added an Area field to the Zone Design Summary Report. You can download it from http://www.irricad.com/Irricad/Download/Help/Files/ZONEDESIGNSUM_AREA.zip . Save the zip file to your hard-drive and extract the .FPC report file to your installed IRRICAD Reports folder, commonly locat...
by jovivier
Tue Apr 09, 2019 9:04 am
Forum: Reports
Topic: Error Logs don't show
Replies: 4
Views: 75

Re: Error Logs don't show

Hi, The first thing to check is if the Errorlog.txt file is present in your IRRICAD folder. The location of your IRRICAD folder will be C:\Program Files (x86)\Irricad\Irricad Pro 17 for a new install or C:\Program Files (x86)\AEI Software\Irricad Pro 16 (or similar) if you upgraded an existing versi...
by jovivier
Mon Apr 08, 2019 5:19 pm
Forum: Reports
Topic: zone design summary
Replies: 2
Views: 87

Re: zone design summary

Dear Hector, Yes, the area can be added to the Zone Summary report, however the field will only be populated if the zones uses an Irrigation Area. Note that Irrigation Blocks inherently contain an Irrigation Area. As there is no written help for the Report Editor it is best if we do this for you. Pl...
by jovivier
Mon Apr 08, 2019 11:32 am
Forum: Announcements
Topic: New IRRICAD Patch for Standalone Version 17
Replies: 0
Views: 89

New IRRICAD Patch for Standalone Version 17

Dear IRRICAD Pro v17 Users, We have released a patch for Pro Version 17. Version 17.02 may be updated using the 17.03 patch which is available for download from http://www.irricad.com/download/version-17-03-patch/?wpdmdl=2370&masterkey=5caa81944f36e . For information about the changes in this patch ...
by jovivier
Mon Apr 08, 2019 10:00 am
Forum: Miscellaneous
Topic: cursor/plotting issues in design portion
Replies: 1
Views: 73

Re: cursor/plotting issues in design portion

This sounds like the snap mode could be set to "Snap to Grid". You can check this on the bottom right of your status bar in the "Snap" panel. Note that this should be set to "Connect" mode when drawing hydraulic items.

The IRRICAD Team
by jovivier
Mon Apr 08, 2019 9:33 am
Forum: Miscellaneous
Topic: Link licence transfer
Replies: 8
Views: 129

Re: Link licence transfer

Hi Kyle, This could be occurring if BricsCAD was not installed under an Administrator log-in. In these cases the registry will not contain the information that the IRRICAD Link install requires. The method to correct for this is:- 1. Log out and then log in as Administrator. 2. Uninstall BricsCAD v1...
by jovivier
Tue Mar 19, 2019 1:47 pm
Forum: Announcements
Topic: New installations of IRRICAD don't run the next day
Replies: 1
Views: 225

Re: New installations of IRRICAD don't run the next day

This issue has now been resolved. If the issue still persists after re-installing on March 19th (2:45pm NZDT) then please download the troubleshooting guide http://www.irricad.com/Irricad/Download/Help/HowTo/TroubleShootingtheVisualCADDV7RegistrationIssuesWhenInstallingIRRICADProVersion12andLater.pd...
by jovivier
Tue Mar 19, 2019 8:47 am
Forum: Announcements
Topic: New installations of IRRICAD don't run the next day
Replies: 1
Views: 225

New installations of IRRICAD don't run the next day

March 18th 2019. It has come to our attention that the Visual CADD registration service is currently off-line. This means that any new installations of IRRICAD Standalone will not be able to register the VCADD engine. The program will run today but tomorrow you will only get the splash screen and no...
by jovivier
Thu Mar 14, 2019 9:05 am
Forum: FAQs for IRRICAD Link
Topic: If receive message: "Attempted an unsupported operation" in Database Editor
Replies: 0
Views: 144

If receive message: "Attempted an unsupported operation" in Database Editor

If receive message: "Attempted an unsupported operation" in Database Editor If you receive a message that says "Attempted an unsupported operation" when running the Database Editor this is caused by the TeeChart8.ocx control either missing or not being registered on your computer for the new install...
by jovivier
Thu Mar 14, 2019 9:01 am
Forum: FAQs for IRRICAD Link
Topic: If Hydraulic Gradeline does not work in Link
Replies: 0
Views: 118

If Hydraulic Gradeline does not work in Link

If you are not seeing the Hydraulic Gradeline in IRRICAD Link after actioning the tool, and can see the "HGL" command in the command line then this issue is caused by a missing on non-registered OCX control. 1. First check that the TeeChart file is present in your installed Irricad folder, commonly ...
by jovivier
Tue Mar 12, 2019 9:52 am
Forum: Importing and Exporting
Topic: New Install Import from Google NOT working
Replies: 1
Views: 196

Re: New Install Import from Google NOT working

This issue sounds like the Google side of the API key has not been set up correctly. Do you have only one API key? Has the billing been attached to the API key that you have entered into your IrricadGEImport.ini file? Have you added/enabled the "Maps Elevation API " option as per the instructions? W...
by jovivier
Fri Mar 08, 2019 4:11 pm
Forum: Announcements
Topic: New Patch for IRRICAD Link v16
Replies: 0
Views: 238

New Patch for IRRICAD Link v16

A new patch is now available for IRRICAD Link - v16.13. This will patch 16.06, 16.08, 16.11 and 16.12 version of IRRICAD Link. Download and install the applicable patch for your CAD version from: For AutoCAD 2016 - http://www.irricad.com/download/acad-2016-v16-13/?wpdmdl=1913&masterkey=5b5a7c9cd9740...
by jovivier
Fri Mar 08, 2019 4:06 pm
Forum: Announcements
Topic: Upcoming IRRICAD Training
Replies: 0
Views: 174

Upcoming IRRICAD Training

A training workshop has been scheduled in New Zealand, 2nd to 5th April 2019.
For more details or to register your interest visit http://www.irricad.com/training-workshops/.

The IRRICAD Team
by jovivier
Fri Feb 22, 2019 1:52 pm
Forum: Miscellaneous
Topic: SYSTEM FLOWS LABEL
Replies: 1
Views: 169

Re: SYSTEM FLOWS LABEL

Yes, you can. In Version 17 you add the system flow number to the keywords. #HY_PRESS~1##PRESSUNIT# #HY_FLOW~1##FLOWUNIT# #HY_PRESS~2##PRESSUNIT# #HY_FLOW~2##FLOWUNIT# continue for each system flow required. Note the use of the above keywords with system flow number is only available in Version 17 a...
by jovivier
Thu Feb 21, 2019 3:18 pm
Forum: Miscellaneous
Topic: REMOTE DESKTOP ERROR
Replies: 4
Views: 447

Re: REMOTE DESKTOP ERROR

Unfortunately, we cannot enable access via Remote Desktop, however there are other options for accessing your work computer from outside of the office. - networking the dongle - this requires good internet access, or via VPN, and the software installed on the 2nd computer. - access the work computer...
by jovivier
Tue Feb 12, 2019 11:27 am
Forum: Bug Reports
Topic: .dez not listed in Default Apps
Replies: 9
Views: 775

Re: .dez not listed in Default Apps

Hi,

Please see our Support FAQ post for further assistance with this:-
viewtopic.php?f=17&t=661#p1540

The IRRICAD Team
by jovivier
Tue Feb 12, 2019 8:52 am
Forum: Support FAQs
Topic: File Association for IRRICAD Version 17 (Running IRRICAD from DEZ File)
Replies: 0
Views: 289

File Association for IRRICAD Version 17 (Running IRRICAD from DEZ File)

You may find that if you have installed IRRICAD Version 17 as a new install, rather than upgrading an existing installation, that double-clicking on a DEZ file will no longer start up IRRICAD. In general, selecting the program to associate with DEZ files should work when selecting "Open With..." whe...
by jovivier
Mon Feb 11, 2019 11:09 am
Forum: CAD Drawing
Topic: Previewing .vcs files.
Replies: 4
Views: 478

Re: Previewing .vcs files.

Hi Brayden, In IRRICAD Standalone the only way to do this is to load the symbols into the Symbol manager and then preview them one by one. Apart from recreating a symbol with a new symbol name (the successful method of renaming existing symbols) in Version 15+ the Tools|Duplicate Symbol File functio...