Search found 118 matches

by Dan Crosby
Tue Apr 09, 2019 10:28 am
Forum: Reports
Topic: Error Logs don't show
Replies: 4
Views: 378

Re: Error Logs don't show

Hi, Another thing to check is that ReportViewer.exe is present and you can run it. We have had some instances of anti-virus software quarantining this file. If your anti-virus software has grabbed this file, you'll need to release it and configure an exception to prevent future problems. Could you ...
by Dan Crosby
Fri Apr 05, 2019 3:22 pm
Forum: Miscellaneous
Topic: Link licence transfer
Replies: 8
Views: 559

Re: Link licence transfer

Hi Kyle,

Not sure what else to try. Could you please screen shot the error message and send it to support at irricad dot com?

Thanks,

Dan
by Dan Crosby
Fri Apr 05, 2019 1:02 pm
Forum: Miscellaneous
Topic: Link licence transfer
Replies: 8
Views: 559

Re: Link licence transfer

Hi Kyle, Just to confirm... You have BricsCAD v18 and BricsCAD v19 installed? You can run up both versions, and the last one you ran (and closed) was v18? You are trying to install the Link v16.06 full package for BricsCAD v18, not the Link v16.13 patch? When you run the Link install, it can't find ...
by Dan Crosby
Fri Apr 05, 2019 10:28 am
Forum: Miscellaneous
Topic: Link licence transfer
Replies: 8
Views: 559

Re: Link licence transfer

Hi Kyle,

Trying running BricsCAD v18 first before running the Link install, otherwise Link will probably think you don't have BricsCAD v18.

(BricsCAD tends to remember which version and profile you last executed)

Regards,

Dan
by Dan Crosby
Thu Apr 04, 2019 1:28 pm
Forum: FAQs for IRRICAD Link
Topic: How To: Add your logo to an Irricad Link layout
Replies: 0
Views: 415

How To: Add your logo to an Irricad Link layout

Irricad Link comes with some pre-installed file templates, which include paper-space Layouts. The Layouts contain the Irricad logo, but you may wish to replace this with your own company branding. This guide will focus on modifying a pre-installed Irricad template to include different branding. For...
by Dan Crosby
Wed Mar 20, 2019 12:14 pm
Forum: Support FAQs
Topic: Toolbar ghosting / positioning problems on hi-res monitors
Replies: 0
Views: 411

Toolbar ghosting / positioning problems on hi-res monitors

Some problems with ghosting or positioning toolbars or buttons have been reported while customising Irricad on high resolution monitors under Windows 10. These problems can be alleviated by changing the "High DPI Settings" on your Irricad shortcut as follows: Right-click your Irricad shortcut and ch...
by Dan Crosby
Mon Feb 11, 2019 1:21 pm
Forum: CAD Drawing
Topic: Previewing .vcs files.
Replies: 4
Views: 982

Re: Previewing .vcs files.

Hi Brayden,

It is relatively quick to load all symbols into Irricad to preview in the symbols dialog. You can load all the symbols in one go by selecting all of the files in the "Load" dialog.
Symbols.png
Symbols.png (31.57 KiB) Viewed 948 times
Hope this helps,

Dan
by Dan Crosby
Fri Jan 18, 2019 11:41 am
Forum: Bug Reports
Topic: .dez not listed in Default Apps
Replies: 9
Views: 1285

Re: .dez not listed in Default Apps

Remember to 'Run as administrator' if you can
by Dan Crosby
Fri Jan 18, 2019 10:59 am
Forum: Bug Reports
Topic: .dez not listed in Default Apps
Replies: 9
Views: 1285

Re: .dez not listed in Default Apps

It sounds like you may not have permissions to change the necessary registry entries. Does that sounds like a possibility?
by Dan Crosby
Fri Jan 18, 2019 9:57 am
Forum: Hydraulic Design
Topic: Mainline pipes not joining in IrriCAD Link
Replies: 1
Views: 561

Re: Mainline pipes not joining in IrriCAD Link

Hi Jim,

Do you mean when drawing mainline pipes they aren't connecting to each other?
Or are you using Irricad's 'Check Connectivity' tool?

Dan
by Dan Crosby
Fri Jan 18, 2019 8:34 am
Forum: Bug Reports
Topic: .dez not listed in Default Apps
Replies: 9
Views: 1285

Re: .dez not listed in Default Apps

You can re-establish the Irricad file association in Windows 10 by right-clicking a .dez file and choosing the "Open With", then "Choose another app" option. Remember to also select "Always use this app to open .dez files" to make the change permanent.
Capture.PNG
Capture.PNG (139.89 KiB) Viewed 1273 times
by Dan Crosby
Fri Jan 18, 2019 8:15 am
Forum: Miscellaneous
Topic: Font Size
Replies: 1
Views: 467

Re: Font Size

Hi David, You can make all Windows text larger by increasing the DPI scaling. See here for instructions for Windows 10: Change DPI Scaling Windows 10 Please note that, depending on your system, you may also have to adjust your Irricad setup slightly, please see Jo's post here: If Image is Incorrect ...
by Dan Crosby
Tue Dec 11, 2018 8:39 am
Forum: Miscellaneous
Topic: Fittings Label
Replies: 1
Views: 532

Re: Fittings Label

Hi Kyle,

Please see Appendix I: Keywords for Labels and Plot Templates in the Technical Reference section of the help file. Keywords #FITTINGS# and #FITTINGSNOTAB#.

Regards,

Dan
by Dan Crosby
Thu Oct 11, 2018 10:30 am
Forum: Announcements
Topic: New Global DEM Dataset Released
Replies: 0
Views: 768

New Global DEM Dataset Released

DLR in Germany have released a new global DEM dataset: https://geoservice.dlr.de/web/dataguide/tdm90/ It has an reported absolute vertical accuracy of less than 10m, and a relative vertical accuracy of less than 2m (some media claims an accuracy of 1m!) At present data can only be retrieved in raste...
by Dan Crosby
Thu Sep 13, 2018 10:44 am
Forum: Hydraulic Design
Topic: Moving a sub-main
Replies: 1
Views: 612

Re: Moving a sub-main

Hi Kyle, How you approach this depends on how the block and sub-main were created originally. If you have a simple block of laterals (i.e., not a block entity) you can select all the submain pipes and junctions and use the Move tool to adjust their position. You can also do this in a block entity, ...
by Dan Crosby
Wed Sep 12, 2018 10:34 am
Forum: Databases and Materials Selection
Topic: Importing data from excel to Irricad database...
Replies: 1
Views: 718

Re: Importing data from excel to Irricad database...

Hello, This is certainly possible using the Query tab in the database editor, but depending on the type of component data you wish to import, you may need some knowledge of how the database is structured in order to make it work. You can open the database in Access but there are a couple of potenti...
by Dan Crosby
Tue Sep 11, 2018 1:53 pm
Forum: Hydraulic Design
Topic: Sub dividing block
Replies: 1
Views: 646

Re: Sub dividing block

Hi Kyle,

Is it possible you aren't selecting the Irrigation block entity? Is there an ordinary polyline at the same position? You can use the CTRL+Select tool to distinguish between overlapping entities when making a selection.

Regards,

Dan
by Dan Crosby
Tue Sep 11, 2018 10:40 am
Forum: Miscellaneous
Topic: North Arrow Autocad Link
Replies: 2
Views: 769

Re: North Arrow Autocad Link

Hi again Jackson, Sorry - it has been brought to my attention that there does seem to be an indirect issue with our database symbol block definition (DWG) files. The problem appears to be that the file has exactly the same name as the block definition it contains, which triggers some sort of limitat...
by Dan Crosby
Tue Sep 11, 2018 9:05 am
Forum: Miscellaneous
Topic: North Arrow Autocad Link
Replies: 2
Views: 769

Re: North Arrow Autocad Link

Hi Jackson,
Inserting blocks is not an intrinsic Irricad function, but part of AutoCAD. I would say though I have seen numerous posts in AutoCAD forums from people having trouble with dynamic north arrows.

Perhaps this link will help:

To Work With North Arrows

Regards,

Dan
by Dan Crosby
Mon Sep 10, 2018 2:07 pm
Forum: Miscellaneous
Topic: Reports on Irricad Link
Replies: 2
Views: 811

Re: Reports on Irricad Link

Hi Kyle, I'm not sure I fully understand your situation - are you trying to restore the reports in the standalone Irricad menus? Or include your custom reports in Link? Or both? Hopefully the following points will cover all situations! In standalone Irricad, the Report menus are built from the file...