Design 'Selected' Valve

Product improvement suggestions or feature requests can be made in this forum.
Post Reply
User avatar
Kosi Kalogerinis
Posts: 56
Joined: Fri Oct 23, 2009 3:56 pm
Company: Stantec Australia Pty Ltd
City / Town: Adelaide, South Australia

Design 'Selected' Valve

Post by Kosi Kalogerinis » Thu Oct 25, 2018 1:13 pm

Another idea that would dramatically improve efficiencies on larger designs is to be able to select a valve and choosing design selected valve > analyse (as an example).

Bonus points if you could double click on the valve and be able to adjust all the parameters found within zone design configuration for that relevant valve. Continually going in and out of zone design configuration while optimising blocks can be such a chore!

User avatar
Gennaro Vellotti
Posts: 50
Joined: Wed Oct 14, 2009 3:28 pm
Company: Netafim Australia Pty Ltd
City / Town: Adelaide
Location: Adelaide, Australia

Re: Design 'Selected' Valve

Post by Gennaro Vellotti » Wed Jan 23, 2019 9:31 am

This sounds like a great idea!
You only live once, but if you work it right, once is enough.

Post Reply