zone design summary

Discussion about zone, mainline, management, costing and bill of materials reports.
Post Reply
Hector
Posts: 3
Joined: Fri Apr 05, 2019 8:33 am
Company: Olivos spa
City / Town: Rengo
Product: Irricad Standalone

zone design summary

Post by Hector » Fri Apr 05, 2019 9:09 am

can you add to the zone design summary report the area of each zone?

User avatar
jovivier
Site Admin
Posts: 548
Joined: Thu Mar 12, 2009 2:57 pm
Company: LVL
City / Town: Blenheim
Location: Lincoln, New Zealand
Contact:

Re: zone design summary

Post by jovivier » Mon Apr 08, 2019 5:19 pm

Dear Hector,

Yes, the area can be added to the Zone Summary report, however the field will only be populated if the zones uses an Irrigation Area. Note that Irrigation Blocks inherently contain an Irrigation Area.

As there is no written help for the Report Editor it is best if we do this for you. Please confirm if you would like this option added to the standard Version 17 Zone Design Summary Report.

Note that as report customisation is outside of normal priority support we can only do this as time, and prior commitments, allows.

The IRRICAD Team

User avatar
jovivier
Site Admin
Posts: 548
Joined: Thu Mar 12, 2009 2:57 pm
Company: LVL
City / Town: Blenheim
Location: Lincoln, New Zealand
Contact:

Re: zone design summary

Post by jovivier » Wed Apr 17, 2019 2:11 pm

Hi Hector,

I have added an Area field to the Zone Design Summary Report. You can download it from http://www.irricad.com/Irricad/Download ... M_AREA.zip . Save the zip file to your hard-drive and extract the .FPC report file to your installed IRRICAD Reports folder, commonly located at C:\Program Files\AEI Software\Irrricad Pro 16\Reports or for a new install of Version 17 in C:\Program Files\Irricad\Irrricad Pro 17\Reports.
Restart IRRICAD and you will now see the "Zone Design Summary w Area" report in the list.

The IRRICAD Team

Post Reply