Irricad

Hi Dan.
I understand why. Just wondering if it was possible. It would save some manual time.
Thanks

Hi Jo.
When I set maximum at 12 or 14 lines, there are occurances of 11 or 13 lines per manifold. This means that when you have 2 lines per tree row, that you can get 2 ends of different manifolds on the same row. This doesn't happen in reality, and its hard to see the break between manifolds on a 1 ...

Would it be possible to add a lateral count quantity per flush manifold to be in 2's specifically or maybe 3's or 4's?
A large number of tree crops are watered via 2 driplines per row. But quite often automated flush assembly valves show a flush valve placed on a tree row where it is connected to ...

Thanks Jo.
That sorted it.

Version 19.
Tried importing image at all different levels (Standard --> Large)
The new image doesn't line up with previous drawing against previous version of Irricad GE import.
I have imported a whole area and part areas but they are consistently 20M longer and part areas don't line up with each ...

Thanks Kosi.
Too easy.

Hi Folks.
When importing elevations from Google Earth is it possible to have the elevation points default to GE elevation layer so that they are not viewed with the contours on the same layer?

Also when generating labels for the contours, is it possible to have the labels default to the elevation ...

Is it possible to default the elevation labels to the elevation layer? So that labels are also turned off when the elevations layer is turned off.
Thanks

How is the AutoCAD version coming along?
When can we expect it to be available?

I agree.
So.... is this change able to be made? No reply has been made.

Can I push a little harder and suggest a moveable window that stays open and updates with each "analyse" command?
It is a key part of doing designs.
Cheers
JH

Hi Sam.
It's good to see you giving IrriCAD a good flex.
Australian standards for emitter flow variation is a maximum of 10%. A good designer will usually design for less than this depending on how critical the job is. 10% or less is easily achieved with quality pressure compensating emitters. But ...

Hi folks. Just a couple of little quirks I hope you can help me with:

1. When exiting IrriCAD the program stalls for approx 1 minute before closing or reminding me to save.

2. Running snaps / snaps are not locking onto snap points accurately. The snap box is attracted to further away points or not ...

Hi Dan.
Thanks for the response.
I'll work with V10 over a wide range of designs and endeavour to send you any plans that give me grief, along with details.
Cheers JH

I fully support this idea.
JH

GPS spot heights can be directly imported to IrriCAD, and 3D DEM viewer quickly calculates the correct shape. However the designer cannot tell what heights the spots are and therefore not estimate easily where the zone pipes should go.
Currently yet another extra program is required to create ...

Years ago (<10), WCADI had a function where it would draw a line of best fit for the submain according to elevation information. Whislt it was never straight, it still allowed the designer to place the sub-main as logically close to that line, or change valve area shape, if required. Real time saver ...

Hi.
Had some really strong requests for IrriCAD becoming an AutoCAD plug-on.
Most CAD users are familiar with AutoCAD and the commands etc... (Current VCADD "rotate command is awful)
Majority of designers have a copy of AutoCAD available to them.
Is this a possibility??
Is it worth investigating ...

Hi folks.

I'm having similar stability issues with 9.56 as previously stated with 9.26, single user operation. Examples include:

The program reacted to "user defined" lateral direction whilst using "Block" tool for sprinkler design. the system crashed 5 times leaving no error message, and when I ...

Are there any plans to enable jpeg/bitmap/png/tiff etc.. to be pasted into the plot layout rather than have to be vector based?

Hi folks.

Could you make it so that we can uncheck "connected" box wthin Spray Block Entity to allow for multiple lateral sizes to be used?
We (there are many of us), need this feature in order to easily design sprinkler systems with up to 5 lateral sizes.
Using "Block" is cumbersome and does not ...