Irricad

Hi everyone, I have a problem, I do not match the load losses of the main line report of a certain section of pipeline with the information of head loss of the option "object info"

thank you very much for your help

attached photos

<img src="http://fdzeta.com/subir/images/0Nw9u.jpg" border="0" />

http://fdzeta.com/subir/?v=0Nw9u.jpg

http://fdzeta.com/subir/images/0Nw9u.jpg

--------------------------

http://fdzeta.com/subir/?v=Ooqbs.jpg

http://fdzeta.com/subir/images/Ooqbs.jpg

<img src="http://fdzeta.com/subir/images/Ooqbs.jpg" border="0" />

Hi Miguel,

In the report the Headloss is the combined friction loss and elevation change. In Object Info IRRICAD specifies the friction loss separately from the elevation change. In your example a friction loss of 0.46m less an elevation change of 0.34m gives an overall headloss of 0.12m.

In my example the reports show a headloss of 0.03m because of the friction loss of 0.10m and an elevation gain of -0.07m

thanks