Irricad

I'm a bit confused about the travel time, specifically the MAXIMUM LATERAL TRAVEL TIME. I would like to better understand how this time is calculated, as it seems to be greatly overestimated. For example, a lateral drip line that is only 50 meters long, at level, results in times exceeding 20 minute...

Dripper SDR Hello, I am registering a new dripper pipe, its nominal flow rate is 1.6 liters per hour, when I fill in the nominal specific discharge rate (lph/100) should I fill it with the nominal flow rate of the dripper which is 1.6, or should I use the real flow rate which would be 2.2 liters per...

Thank you for your help, I am sending you the file of a situation similar to the one I reported. Could you please check it?

Good morning, I performed a calculation to size a supply in the following situation. Let's say the water source is at a height of 30, the pipe runs 100 meters up to elevation 60, which is halfway along the stretch, after which it drops to elevation 20. When I get the system duty report, the required...

OK MUITO OBRIGADO

Bom dia, como emitir a soma de materiais necessários em zona em parte do projeto ( exemplo da válvula 1 ate a válvula 5)

Bom dia, como emitir a soma de materiais necessários em zona em parte do projeto ( exemplo da válvula 1 ate a válvula 5)

Good morning, it is possible to use more than one diameter on the same weldable PVC side line. As an example, on a side with eight sprinklers of 680 liters/hour, make a gradual reduction to start with a larger diameter pipe and finish with a smaller diameter.

Does the message "Invalid input Minimun is greater than maximum" have to do with the database? How to resolve it when it occurs?