Problem with Toolbars or Layer Bar Docking

Frequently asked questions - and answers!
Post Reply
User avatar
jovivier
Site Admin
Posts: 578
Joined: Thu Mar 12, 2009 2:57 pm
Company: LVL
City / Town: Blenheim
Location: Lincoln, New Zealand
Contact:

Problem with Toolbars or Layer Bar Docking

Post by jovivier » Fri Mar 26, 2010 8:37 am

If you are having a problem with toolbars or layer bar not connecting properly when created or moved, then the Winicad.ini file will need to be re-created.

In Version 12 +
1) Close IRRICAD.
2) Browse to the Irricad\config folder commonly located in C:\Program Files (x86)\AEI Software\Irricad Pro 12\config.
3) Click on the Winicad.ini file and change the name of the file to something like "WinicadOld.ini". (Note the ".ini" will not display if the folder options have not been changed to display extensions for known file types).
4) Restart IRRICAD. A new default Winicad file will be created. Note any toolbar customisation will have been lost so you will need to customise as required.

In older versions
1) Close IRRICAD.
2) Browse to the system folder, commonly C:\Windows.
3) Click on the Winicad.ini file and change the name of the file to something like "WinicadOld.ini". (Note the ".ini" will not display if the folder options have not been changed to display extensions for known file types).
4) Restart IRRICAD. A new default Winicad file will be created. Note any toolbar customisation will have been lost so you will need to customise as required.

Tip: After customising your toolbar close IRRICAD and copy the new Winicad.ini to another folder. Then if anything happens to the working ini file you can copy this back to the config folder and immediately have your preferred layout back.

Post Reply