54. More than 24 System Flows

Tips to help you get the most out of Irricad.
Post Reply
User avatar
jovivier
Site Admin
Posts: 697
Joined: Thu Mar 12, 2009 2:57 pm
Company: LVL
City / Town: Blenheim
Location: Lincoln, New Zealand
Contact:

54. More than 24 System Flows

Post by jovivier »

The default run time for system flows is 1 hour. The run time default cannot be set to a different length however you can change the number of days in the Cycle Time to allow for more system flows.
1. Go to Design|Design Paramaters|Economic Parameters.
2. In the “Cycle time (days)” field increase the number of days to allow for sufficient one hour run times to cover your number of system flows.
3. Click OK and then action one of the Assign System Flows... options.

The IRRICAD Team

Post Reply