Using 25 pin to 9 pin adaptor for the dongle

FAQs for older versions of Irricad.
Post Reply
User avatar
jovivier
Site Admin
Posts: 548
Joined: Thu Mar 12, 2009 2:57 pm
Company: LVL
City / Town: Blenheim
Location: Lincoln, New Zealand
Contact:

Using 25 pin to 9 pin adaptor for the dongle

Post by jovivier » Mon Nov 22, 2010 3:15 pm

I have found an 25 pin to 9 pin adaptor for the dongle, but IRRICAD still does not find it. What is wrong?

The dongle (Sentinel or hardware key) can only plug into the Parallel port (LPT1). No parallel ports are 9 pin so you are plugging the dongle into the COM port. Unplug the dongle and plug it into the printer port and plug the printer cable into the back of the dongle.

Post Reply