IRRICAD Pro V9+ will run without any problems on Windows 7 and later there are however some points to note when installing older versions on Windows 7, 8 and 10.
1) When installing Pro V9 and 9.5 the dongle driver is not installed as part of the IRRICAD installation process (this is because the installer doesn’t know about Windows 7+). To install the driver simply locate, in Windows Explorer/My Computer, the Driver.bat file in the \Driver folder on the installation CD. Double-clicking (or right-click and select “Open”) will install the dongle driver. Answer “Yes” to any User Access Control warnings that appear.
2) Make sure that the user account that will be used to run IRRICAD has “Modify” and “Write” permissions on the main IRRICAD folder and sub-folders.
3) Typically when IRRICAD Pro V9 or 9.5 is run for the first time a “Dll Load Error” warning will appear. If this happens click [Ok] and wait for a “Cad 5” warning to appear. Click [Ok] again and then restart IRRICAD. Note that if this warning continues to appear then this is an indication that the user account being used doesn’t have the necessary file permissions as above.
Note, if installing V8 or V9 on to Windows 7, 8, or 10 download the newest Sentinel Protection Installer (7.6.7) from http://www.irricad.com/irricad/download ... r7.6.7.exe
Installing Older IRRICAD Versions on Windows 7, 8 and 10
-
jovivier
- Site Admin
- Posts: 919
- Joined: Thu Mar 12, 2009 2:57 pm
- Company: Lincoln Agritech Ltd, IRRICAD Software
- City / Town: Lincoln
- Location: Canterbury, New Zealand
- Contact:
Changing file permissions in Windows 7 for Irricad
Download the attached file for step-by-step instructions to modify permissions in Windows 7:-
http://www.irricad.com/phpbb3/viewtopic.php?f=18&t=69
http://www.irricad.com/phpbb3/viewtopic.php?f=18&t=69
You do not have the required permissions to view the files attached to this post.