Hi.
When exporting from irricad in BricsCAD base, to google earth (kml), nothing is shown or when saving it as kmz and executing it, nothing is seen. It was from one moment to another, because I was just exporting other files. What could be the problem or solution? Thank you
Exporting to google earth
-
Pablo Faundez
- Posts: 3
- Joined: Thu Dec 19, 2019 11:10 pm
- Company: SCF AGROINGENIERIA
- City / Town: Chillan
- Product: Irricad Link (BricsCAD)
-
jovivier
- Site Admin
- Posts: 919
- Joined: Thu Mar 12, 2009 2:57 pm
- Company: Lincoln Agritech Ltd, IRRICAD Software
- City / Town: Lincoln
- Location: Canterbury, New Zealand
- Contact:
Re: Exporting to google earth
Hi Pablo,
Did you receive any messages when exporting? What is the kml file size?
I noticed that if the "Datum" does not match the coordinates then you will receive a message "Some entities in this design do not have valid UTM coordinates. They will not be exported." If this message occurs then Google Earth will not be executed, or, if saving to file, the file size will be very small (e.g. 9kb) and basically have nothing in it.
If your coordinates are not UTM then set the "Datum"to the correct projection in Irricad Options|Miscellaneous and try again.
If it still doesn't work please let us know.
The IRRICAD Team
Did you receive any messages when exporting? What is the kml file size?
I noticed that if the "Datum" does not match the coordinates then you will receive a message "Some entities in this design do not have valid UTM coordinates. They will not be exported." If this message occurs then Google Earth will not be executed, or, if saving to file, the file size will be very small (e.g. 9kb) and basically have nothing in it.
If your coordinates are not UTM then set the "Datum"to the correct projection in Irricad Options|Miscellaneous and try again.
If it still doesn't work please let us know.
The IRRICAD Team