hi,
when generating the BOM reports of irricad on BRICSCAD base the program is closed and the report is not obtained. But with other reports like the SDR it generates it without problems
Report BOM
-
Pablo Faundez
- Posts: 3
- Joined: Thu Dec 19, 2019 11:10 pm
- Company: SCF AGROINGENIERIA
- City / Town: Chillan
- Product: Irricad Link (BricsCAD)
-
jovivier
- Site Admin
- Posts: 919
- Joined: Thu Mar 12, 2009 2:57 pm
- Company: Lincoln Agritech Ltd, IRRICAD Software
- City / Town: Lincoln
- Location: Canterbury, New Zealand
- Contact:
Re: Report BOM
Hi Pablo,
When the BOM reports cause a crash this is usually a symptom of a broken junction or zero-length pipe in the design.
We have just released a new patch for IRRICAD Link that will allow the reports to open and display despite this issue. Download and install from https://www.irricad.com/upgrades-patches/ .
The IRRICAD Team.
When the BOM reports cause a crash this is usually a symptom of a broken junction or zero-length pipe in the design.
We have just released a new patch for IRRICAD Link that will allow the reports to open and display despite this issue. Download and install from https://www.irricad.com/upgrades-patches/ .
The IRRICAD Team.