management symbol in V18.06

[marcioagr]

Hi!
I thought I had corrected this as a management symbol in V18.06

[jovivier]

The issue you are seeing is that when multiple blocks are running on one valve the area displayed in the management is drawn from the extents of the blocks. This means that when the blocks are indented the hatching of the Zone may overlap with other zones.
In Version 19, due out next month, the Zone hatching will be created from the individual block boundaries.

In the mean time there are ways to assist Version 18 by changing the registry settings as described in the Readme - see #7 under "Bug Fixes and Additions Since 17.03" (commonly located in C:\Program Files (x86)\Irricad\Irricad Pro 18\Help). Try a setting of 3 or 4 for the ConcaveHullFactor.

The IRRICAD Team.

[marcioagr]

Hi!
Okay, thanks again for the feedback.

[Heldo Lima]

Please, I didn´t get what you mean with setting 3 or 4. If I´m not mistaken these settings 3 or 4 is about computer configuration and plotting, isn´t it?

[jovivier]

The settings for the ConcaveHullFactor (as per the Readme) are:
0 Use the old convex hull (i.e., the current behaviour up to v17).
1 Use block boundaries for single block zones, otherwise convex hull.
2 Use concave hull only, falling back to convex on failure.
3+ Use block boundaries, otherwise concave hull, falling back to convex.

I suggest setting it to '4' if it isn't already (4 is the default setting).