Helo!
I have a project with 29 operations, I would like to know the easiest way to direct the flows to the valves since the default execution time is 1 hour.
I changed the cycle time to 2 days, but it still didn't work.......
More than 24 System Flows!
-
marcioagr
- Posts: 59
- Joined: Sun Aug 23, 2020 7:07 am
- Company: Autônomo
- City / Town: Pratos de Minas
- Product: Irricad Standalone
More than 24 System Flows!
You do not have the required permissions to view the files attached to this post.
-
jovivier
- Site Admin
- Posts: 919
- Joined: Thu Mar 12, 2009 2:57 pm
- Company: Lincoln Agritech Ltd, IRRICAD Software
- City / Town: Lincoln
- Location: Canterbury, New Zealand
- Contact:
Re: More than 24 System Flows!
Hi Marcio,
You have done the correct thing when having more than 24 system flows. The message you are getting is not the "Maximum number of system flows exceeded" but rather the "Times for System Duties overlap". Check that row 25 does not also start on Day 1 (1:0:0 - 1:1:0). If you cannot find the issue close the dialog and action Design|Clear Management before trying to assigning the zones again.
The IRRICAD Team
You have done the correct thing when having more than 24 system flows. The message you are getting is not the "Maximum number of system flows exceeded" but rather the "Times for System Duties overlap". Check that row 25 does not also start on Day 1 (1:0:0 - 1:1:0). If you cannot find the issue close the dialog and action Design|Clear Management before trying to assigning the zones again.
The IRRICAD Team