UTM problem...

[Pancho]

Hello.
I am using the IrriCAD Link in Autodesk Civil 3D. It is very practical for me to use the contour lines generated by IrriCAD, but in many cases I import the points in KML format with Civil 3D and also load the image of those points. When I do the same with the IrriCAD Link in the same Civil 3D file, the points and the loaded image do not match. I have checked the UTM zone in both Civil 3D and IrriCAD Link and they are the same. Could you help me with this?
I am using Autodesk Civil 3D 2023 version.
Thank you, greetings.

[Dan Crosby]

Hi Pancho,
If I understand correctly, you are importing points from the same KML file using Civil3D functions and Irricad functions?
How are you loading the images? Irricad will position KML images at the correct coordinates, I'm not entirely familiar with what Civil3D does in this situation?

I'm a little unclear as to what is not matching up...

• Is it that the Irricad points do not match the Civil3D points?
• Is it that Irricad image does not match the points?
• Or the Irricad points don't match the Civil3D images?

If you could provide some example files to demonstrate the problem, that would be very helpful.

Thanks,

Dan