Drip Sides on Curves
-
- Posts: 7
- Joined: Mon Aug 14, 2023 9:36 am
- Company: Três Vales Agropecuaria / Netafim Brasil
- City / Town: Capelinha MG
- Product: Irricad Standalone
Drip Sides on Curves
I need to develop a project where the drip lines follow contour lines and are therefore curved. I have a problem where irricad can't draw curves, it always generates sharp edges. Is there something specific in irricad to meet this demand, or is there a plan for implementation?
- Dan Crosby
- Site Admin
- Posts: 176
- Joined: Thu Apr 30, 2009 9:28 am
- Company: Lincoln Agritech Ltd.
- City / Town: Lincoln
- Location: Lincoln, New Zealand
- Contact:
Re: Drip Sides on Curves
Hi Rubem,
While you can draw a tape with as many segments as required to form a pseudo-curve, this can be a lot of work.
However, Irricad can convert curved lines into polyline tapes that are a usually good representation:
You can also use the tape block tool to create a block of curved (or 'bent') tapes. Please see the release notes "Previous Additions and Bug Fixes > In Version 19 > Polyline/”Bent” Tape Blocks" for more information.
Regards,
Dan
While you can draw a tape with as many segments as required to form a pseudo-curve, this can be a lot of work.
However, Irricad can convert curved lines into polyline tapes that are a usually good representation:
You can also use the tape block tool to create a block of curved (or 'bent') tapes. Please see the release notes "Previous Additions and Bug Fixes > In Version 19 > Polyline/”Bent” Tape Blocks" for more information.
Regards,
Dan
You do not have the required permissions to view the files attached to this post.
Dan Crosby
Irricad Developer
Lincoln Agritech Ltd