I'm using Irricad Link 21, and after the recent patch I have found that my materials reports are reporting the number of locations a pipe is found rather than rounding it to the lengths as set by the pipe fitting matching table. This only happens to pipe that is in an assembly. All mainline and zone pipe is reporting accurately.
For example,
I have 2" Sch 40 in flush assemblies and it will appear in the BOM as a quantity of 2.
But, if I have 5' of 2" Sch 40 in the zone or mainline, it will report it as "Lengths, 20' " to fulfill the desired rounding per the pipe fitting matching table.
Pipe lengths not rounding if in assembly
-
Luzvstaicer
- Posts: 4
- Joined: Wed Jun 30, 2021 10:43 am
- Company: AvidWater
- City / Town: Fresno
Pipe lengths not rounding if in assembly
You do not have the required permissions to view the files attached to this post.
-
jovivier
- Site Admin
- Posts: 897
- Joined: Thu Mar 12, 2009 2:57 pm
- Company: Lincoln Agritech Ltd, IRRICAD Software
- City / Town: Lincoln
- Location: Canterbury, New Zealand
- Contact:
Re: Pipe lengths not rounding if in assembly
Thank you for letting us know about this. It will be fixed in the next Link patch (no release date for this as yet).
The IRRICAD Team
The IRRICAD Team