Can anyone help me out with a problem I am having with an Irricad model? I have designed the system with Irricad and everything is working well however when I tried to produce a Zone/Mainline BOM it listed everything as unconnected. I checked outlet connectivity and it shows every outlet in the system (over 3000) as unconnected, however all other reports (Zone Design etc) seem to be fine.
I cannot work this out as it appears to be connected and working but the BOM shows it as unconnected. Does anyone have any ideas?
I am using Irricad 12.12.
Thanks for your help. Cheers, Steve
Unconnected outlets
-
Stephen Whitehead
- Posts: 2
- Joined: Wed Oct 16, 2013 11:16 am
- Company: Agri-Tech Irrigation Enterprises
- City / Town: Waikerie
-
jovivier
- Site Admin
- Posts: 919
- Joined: Thu Mar 12, 2009 2:57 pm
- Company: Lincoln Agritech Ltd, IRRICAD Software
- City / Town: Lincoln
- Location: Canterbury, New Zealand
- Contact:
Re: Unconnected outlets
Hi Stephen,
Have you accidentally placed mainline outlets on the end of zone pipe or zone outlets on the end of mainline pipe?
Is this a mainline design (i.e. pipe and outlets are mainline)? If so, check the connection to the water supply.
What messages, if any, are you receiving during Zone and Mainline design?
Have you accidentally placed mainline outlets on the end of zone pipe or zone outlets on the end of mainline pipe?
Is this a mainline design (i.e. pipe and outlets are mainline)? If so, check the connection to the water supply.
What messages, if any, are you receiving during Zone and Mainline design?