Labeling Feedback
Posted: Wed May 05, 2010 11:58 am
Hello Irricad Users,
We are evaluating the possibility of expanding the labeling system in Irricad to improve its flexibility. This message is to solicit your views on some of our ideas:
The Irricad Team
We are evaluating the possibility of expanding the labeling system in Irricad to improve its flexibility. This message is to solicit your views on some of our ideas:
- New Label Type Definitions
For instances, a separate label for water supplies. Are any other definitions required?
- Saving / Loading Definitions
We think it would be good to be able to quickly load and save sets of label definitions. Is this something you would find useful?
- Multiple Labels
Should it be possible to have more than one label per entity? (e.g., Zone Pipe Label 1, Zone Pipe Label 2...). For instance, this would allow for the separation of 'physical' labels (e.g., description, length) from 'hydraulic' labels (e.g., flow, head loss).
- 'De-globalisation' of Settings
Would it be useful to have the global label settings (combine pipe, check label length, angle tolerance, length allowance etc.) apply to each label type (pipes etc. only) separately? Alternatively would a single set of these for each of the multiple labels be acceptable? Or would this be a source of confusion?
The Irricad Team