Page 1 of 1
Pipe Crossing Hop
Posted: Mon Feb 14, 2011 12:37 pm
by Gennaro Vellotti
I think a pipe hop for pipes that are not connected, would be a great feature in Irricad. ie, when a main pipe crosses a zone pipe, they are not connected, so Irricad would do a hop. This feature could be both auto (small hop) and manual (for a larger hop, if you are crossing multiple pipes and you don't want 4 or 5 small hops).
Re: Pipe Crossing Hop
Posted: Mon Feb 14, 2011 1:39 pm
by Kosi Kalogerinis
What a great idea Gennaro. This in my opinion is a must have tool/feature. This would help considerably in the reading and interpretation of those plans which carry a lot of cluttered information in confined areas ie general landscape/streetscapes etc.
Re: Pipe Crossing Hop
Posted: Thu Apr 21, 2011 2:47 pm
by Gennaro Vellotti
BUMP 
Re: Pipe Crossing Hop
Posted: Thu Jul 21, 2011 5:07 am
by MikeM
I also agree, this feature alone could likely cause me my to drop my Autocad and turf design module in favor of Irricad. Currently I have been using symbols to replicate the pipe hops however it is quite time consuming.
Another turf related idea though likely more difficult to implement is a densogram placed right into the sprinkler coverage area. I have seen this utilized within some other programs with some good success. Maybe somehow get the already developed data from Nelson's Overlap and CIT's Space data incorporated into Irricad?
Re: Pipe Crossing Hop
Posted: Thu Jul 21, 2011 9:19 am
by John316
Great idea, Gennaro!
That would also simplify a lot of things for me.
What about it, Irricad? (I know, you just released a new version, and we want more....but hey, that keeps you on your toes.)
Btw, I have like V11, so far.
Re: Pipe Crossing Hop
Posted: Fri Jan 25, 2013 2:16 pm
by Rob Murat
Hi Irricad Devlopers.
Has any progress been made on this great idea? It is a time consuming exercise to manually create the pipe hop's not to mention if you have a large number of them on a zone or mainline all with 6 or more junctions you add losses to the system which does reflect the true duty of the zone or pump station. I see there does not seem to be a reply so i guess it is in the too hard basket? Do you have a suggestion that we could use to complete this task easily?
Thanks.
Re: Pipe Crossing Hop
Posted: Tue Jan 29, 2013 4:12 pm
by jovivier
This is very difficult to do and no progress has been made.
One way you could do this manually is create a symbol for the different pipe hops/orientation and place these over the crossings.
Re: Pipe Crossing Hop
Posted: Wed May 08, 2013 4:17 pm
by Gennaro Vellotti
BUMP 
Re: Pipe Crossing Hop
Posted: Fri May 11, 2018 1:29 pm
by Gennaro Vellotti
BUMP

Re: Pipe Crossing Hop
Posted: Fri Jan 24, 2020 12:17 pm
by Kosi Kalogerinis
BUMP
BUMP
BUMP
BUMP
BUMP