Irricad

Posted: **Mon Feb 01, 2010 4:31 pm**

PLEASE NOTE - INPT 36

Block items cannot be Moved/Rotated independently of block

Must be something I am missing here, I will clear the current selection either by a double esc or clicking the clear selection tool. Then I will try and manually move a control valve when this message comes up.

The only solution I have found is to move it within the block enitity

Posted: **Wed Feb 03, 2010 8:34 am**

Hi Kosi,

This bug was fixed in v10. In version 10, you are allowed to move 'point' block items (Valves, junctions, flushing assemblies) provided they are not connected to a lateral (since moving a lateral junction would interfere with spacing).

Dan

Irricad

Block items cannot be Moved/Rotated....

Block items cannot be Moved/Rotated....

Re: Block items cannot be Moved/Rotated....