Emission Uniformity Equations

Frequently asked questions - and answers!
Post Reply
User avatar
jovivier
Site Admin
Posts: 739
Joined: Thu Mar 12, 2009 2:57 pm
Company: LVL
City / Town: Blenheim
Location: Lincoln, New Zealand
Contact:

Emission Uniformity Equations

Post by jovivier »

IRRICAD uses the emission uniformity equation that is the same as the ASABE version except that it uses the mean of the lowest 25% of emitter flows rather than the lowest value:-
EmissionUniformity.png
EmissionUniformity.png (15.22 KiB) Viewed 996 times

If you would prefer to use the ASABE version where the lowest value is used then download the modified reports from http://www.irricad.com/irricad/download ... /ASABE.zip.
Save the zip file to your hard-drive and double-click on it to open. Copy the two FPC files into your IRRICAD reports folder to overwrite the existing uniformity reports, commonly located in C:\Program Files (x86)\Irricad\Irricad Pro 19\Reports.

The IRRICAD Team
Post Reply