Selection filter settings for "wetted radii"
Posted: Fri Mar 04, 2022 5:14 pm
Can anyone help with settings required for selection filter for selecting the wetted radii for zone outlets only please
To only select Zone items you can set the Selection Filter "Group" settings to Zone.
However, the wetted raddi will not highlight with the Selection Filter "Group" set to Zone. Currently the wetted radii are classified in the Drawing "Group" and therefore cannot be differentiated from Mainline outlet wetted radii.
Note that the wetted radii will be on the OUTLET_WETTED_RADII layer for outlets or SL_WETTED_RADII for sprayline outlets.
The IRRICAD Team.