Irricad

Hi,
In my Spray Irrigation Block I have many sprinklers and each one must be a valve-in-head (with own on\off control).
So, I need to connect them with each other and finally to a Water Supply with mainlines, without any additional valves to use.
Is it possible and how?

Thanks a lot

For Valve-in-Head designs all items are selected from the Mainline menu only. Each outlet is both the outlet and the valve therefore no other control valves are required. If you do require isolating valves in the system then select them from Mainline|Misc. Hydraulic. The Mainline tools also have sprayline and cut pipe options for easy input.

For more information look for "Valve-In-Head" in the Help|Help Topics index to locate the sections in the manual that include designing with Valve-In-Head outlets.

The IRRICAD Team.