Page 1 of 1
Close window assign zones to system flow
Posted: Sun Nov 27, 2022 4:23 am
by Miguel_l_e
Hi everyone i am having a problem in irricad that has not happened to me before.
I try to open the assign turns section in my system, but when i open it immediately disappears and the window closes and i cannot place the shifts
Regards
Re: Close window assign zones to system flow
Posted: Mon Nov 28, 2022 12:32 pm
by jovivier
Hi Miguel,
It sounds like you need to upgrade to the latest IRRICAD Version 20 patch, as per our forum post "New Patch for IRRICAD Standalone Version 20" (
viewtopic.php?p=2227#p2227).
Does this fix your issue?
The IRRICAD Team
Re: Close window assign zones to system flow
Posted: Mon Nov 28, 2022 3:37 pm
by Miguel_l_e
hello Jo, thanks for the answer, currently I have version 20.07
Re: Close window assign zones to system flow
Posted: Tue Nov 29, 2022 8:10 am
by jovivier
Do you mean that 20.07 is giving this issue?
If so, this might only be related to your design. Have you checked other designs to see if the same issue occurs?
Please send a copy of your design to your local support team.
The IRRICAD Team.
Re: Close window assign zones to system flow
Posted: Tue Nov 29, 2022 9:43 am
by Miguel_l_e
yes, i have checked, and the problem persist. I have tried everything you said. Please give me an email to forward my design file.
thanks
Re: Close window assign zones to system flow
Posted: Fri Dec 02, 2022 1:06 pm
by jovivier
Hi Miguel,
Can you still use the table options? Such as Assign All Zones to One System Flow, Assign Each Zone to a Unique System Flow, and Other Management Options|Assign System Flows to Zones?
The IRRICAD Team
Re: Close window assign zones to system flow
Posted: Mon Dec 05, 2022 5:10 am
by Miguel_l_e
Hi Jo,
These options (Assign All Zones to One System Flow, Assign Each Zone to a Unique System Flow, and Other Management Options|Assign System Flows to Zones) also have problems.
Re: Close window assign zones to system flow
Posted: Mon Dec 05, 2022 8:52 am
by jovivier
Please send your design to
Support@IRRICAD.com.
The IRRICAD Team
Re: Close window assign zones to system flow
Posted: Wed Dec 07, 2022 7:54 am
by jovivier
Thank you for your design. The issue was caused by a particular control valve or the connection at that point. Running File|Compress followed by File|Repair fixes it.
The IRRICAD Team
Re: Close window assign zones to system flow
Posted: Wed Dec 14, 2022 5:02 am
by Miguel_l_e
Thank you very much Jo, the problem has been solved
Best regards