If Images Disappear
Posted: Wed Dec 07, 2022 2:54 pm
If commonly used images, such as your company logo, disappear leaving only the outline and path then the issue could be that the cache needs to be cleared.
To do so,
1. Go to Tools|Drawing Explorer and select "Images" in the list.
2. You will see a list of the images in the drawing. Right-click on the one that does not display and select "Clear cache".
Note that if this does not solve your issue there are other commands that may have been actioned:-
- right-click on the image boundary and select Properties. Under "Misc" ensure the "Show image" is set to Yes.
- there is a "Hide" command - OLEHIDE. Check that this is set to 0 (for off).
The IRRICAD Team
To do so,
1. Go to Tools|Drawing Explorer and select "Images" in the list.
2. You will see a list of the images in the drawing. Right-click on the one that does not display and select "Clear cache".
Note that if this does not solve your issue there are other commands that may have been actioned:-
- right-click on the image boundary and select Properties. Under "Misc" ensure the "Show image" is set to Yes.
- there is a "Hide" command - OLEHIDE. Check that this is set to 0 (for off).
The IRRICAD Team