Irricad

This message indicates that something is stopping the design from saving.
In our experience this tends to be an open transaction.
We do not know of any causes of this in Link V22 and would need to see the log files to determine what may have caused this.

Note that when the design has open ...

Hi Davie,

The new CV Table report properties ( Reports|Zone Design Reports|Zone CV Table ) are set to automatically sort on Zone name.
If the zone names don't appear to be alphabetical this can occur during manual name editing.

To assist with this:-
- Check there is the same amount of spaces ...

Hi Davie,

Currently, NUMROW cannot be calculated in the reports.
However, you can use #NUMROW# keyword in an Irrigation Block label to provide the number of entire rows, regardless of where the submain is.
Note that this keyword does not count the number of groups.

Via keyword maths you can use ...

This issue sounds like your hatch scales have been broken in a design, which is then remembered in the VCADD files for future designs.
It isn't caused by updating IRRICAD.

When this occurs go into "Select Object" mode (or double-escape) and type HX on the keyboard followed by the <Enter> key.
Then ...

Hi Phil,

Firstly, try to turn off as many layers as you can so that the screen has the bare minimum displayed on it.
Secondly, it helps to zoom into the area that you are trying to hatch.
Does the hatching now work successfully?

If the issue persists please send the design to your local support ...

The issue here is that IRRICAD is looking for a coupler, or a reducing elbow, to complete the fittings at this junction.
For the connection between the 50mm (2") elbow and the 40mm (1.5") riser pipe, a reducing bush (50 M S x 40 F S) present and selectable in the Couplers component group will solve ...

Thanks for your suggestion. This has been added to the Suggestions list.

The IRRICAD Team

With tees in the Tee component group, you will also require reducers and couplers in the Couplers component group to cope with the junctions that have a change in submain size.
Therefore, between 4" and 5" you will need a tee (a 5" x 1.5" tee appears to be your preference) and also a reducer to go ...

This is an issue which appears from time to time in Version 20 and 21, generally caused by a broken symbol table.
The message can usually be safely ignored. However, if you can't proceed with adding a new tape please forward your database to your local support team.

Please note that this issue is ...

Thank you for the design and database.
As I suspected, your "PVC Clamp" is in the "Lateral Takeoffs" component group.

Lateral takeoffs are a special kind of fitting that doesn't require individual entries for each submain size. These are typically grommets with their lateral takeoff fittings ...

I will need the Design and Database to confirm the reason for results. You can email it through to our support email Support@IRRICAD.com.

The IRRICAD Team

The issue is caused by that junction being where the submain changes size from 5" down to 4".
The internal rules make IRRICAD select the 4" tee and a 5" to 4" reducer.

The options are:-
A. Make the submain size change downstream from the lateral connection by placing another junction on the ...

Thank you for your suggestion. We have added this to the Features Request list.

The IRRICAD Team

Thanks for your input Nick, however you have forgotten a very important piece.
If you use RECOVER your must run AUDIT afterwards. RECOVER does not know about IRRICAD objects but AUDIT does (since IRRICAD Link V18 and later).

The IRRICAD Team

Unfortunately there isn't currently a better method to downsize the imagery for use in IRRICAD Standalone.
IRRICAD Link, in AutoCAD or BricsCAD, does not have the same limitations and appears to handle large imagery with ease.

The IRRICAD Team

Hi JP,

I can set the custom report to only report on driplines and not report on other types of zones.
As this custom report does not overwrite the default Travel Time Summary you can use the default report for the other types of zones.

To create a report that combines driplines using "average ...

Hi JP,

I have edited the report for you so that the "Lateral Travel Time" and "InField Travel Time" is now the average instead of the maximum.
Download the file and save to your local drive.
TRAVELTIMESUMMARYAVERAGE.zip

Double-click on the Zip file to open it.
Then drag the "Travel Time Summary ...

Hi Nick,

Due to the horizontal type of reporting and that the Object Info can contain multiple items and system flows we don’t feel adding the Object Info into the Database Info panel is appropriate.

Do you know about the new Persistent Object Info panel in Link V22? See Irricad Options|Release ...

The persistent docking panel, introduced in IRRICAD Link Version 22, allowing hydraulic and other information to be quickly viewed for a single selected item.
Like the “Database Info” panel, this panel can be docked in a multi-tabbed container in BricsCAD, to save space.
ObjectPanelBottom.png ...

The text size for the Object Info window and the Object Info panel are controlled via registry keys.

To change the text size:-
1. With IRRICAD Link closed enter Regedit in the Windows “Search” field. When you see "Registry Editor" in the list double-click on this to open.

2. For Standalone browse ...