Problems with dividing blocks in V19.09
-
marcioagr
- Posts: 59
- Joined: Sun Aug 23, 2020 7:07 am
- Company: Autônomo
- City / Town: Pratos de Minas
- Product: Irricad Standalone
Problems with dividing blocks in V19.09
When I'm going to subdivide the irrigation block, the drip lines change position.
You do not have the required permissions to view the files attached to this post.
-
jovivier
- Site Admin
- Posts: 924
- Joined: Thu Mar 12, 2009 2:57 pm
- Company: Lincoln Agritech Ltd, IRRICAD Software
- City / Town: Lincoln
- Location: Canterbury, New Zealand
- Contact:
Re: Problems with dividing blocks in V19.09
Currently bent/polyline tapes cannot be subdivided.
The work-arounds are:
- make your sub-blocks first. You could use Polygon|Seed for this
or
- use the Cut Lasso tool, located in the Tools menu, to manually subdivide the block as required.
The IRRICAD Team
The work-arounds are:
- make your sub-blocks first. You could use Polygon|Seed for this
or
- use the Cut Lasso tool, located in the Tools menu, to manually subdivide the block as required.
The IRRICAD Team
-
marcioagr
- Posts: 59
- Joined: Sun Aug 23, 2020 7:07 am
- Company: Autônomo
- City / Town: Pratos de Minas
- Product: Irricad Standalone
Re: Problems with dividing blocks in V19.09
OK!
Thank you, always!
Thank you, always!