Hello!
Why is my project giving this message?
Warning IDE_DES 400
Warning IDE_DES 400
-
marcioagr
- Posts: 59
- Joined: Sun Aug 23, 2020 7:07 am
- Company: Autônomo
- City / Town: Pratos de Minas
- Product: Irricad Standalone
Warning IDE_DES 400
You do not have the required permissions to view the files attached to this post.
-
jovivier
- Site Admin
- Posts: 924
- Joined: Thu Mar 12, 2009 2:57 pm
- Company: Lincoln Agritech Ltd, IRRICAD Software
- City / Town: Lincoln
- Location: Canterbury, New Zealand
- Contact:
Re: Warning IDE_DES 400
Hi,
This message generally means that IRRICAD cannot open the zone design file (DZN) or the mainline design file (DML) because the file has not yet been generated by a process or it is in a Read-only state.
If you are running Mainline Design when this error occurs check that you have successfully completed Zone Design for all zones.
Another cause of these sorts of errors are that the files can't be created in the TEMP folder. This might be because there is an existing DZN or DML file that is "Read-only" and therefore can't be accessed. In this case you should empty the TEMP folder and try again.
In general, you will need to browse to C:\Users\[your login name]\AppData\Local\Temp\ and delete all the files in the Temp folder (which is a good thing to do periodically anyway).
To empty your Temp folder:-
1. Close IRRICAD.
2.Browse to C:\Users\(Your login name)\AppData\Local\Temp. Note that if you can't see the "AppData"folder follow the forum post viewtopic.php?p=1423#p1423 to enable hidden folders.
2. Select all the contents and press the Delete button on the keyboard. Note that any programs that are currently running won’t allow their in-use temporary files to be deleted, which is fine in this case. Simply select "Skip" and enable "Do this for all current items".
If the issue persists please let us know.
The IRRICAD Team
This message generally means that IRRICAD cannot open the zone design file (DZN) or the mainline design file (DML) because the file has not yet been generated by a process or it is in a Read-only state.
If you are running Mainline Design when this error occurs check that you have successfully completed Zone Design for all zones.
Another cause of these sorts of errors are that the files can't be created in the TEMP folder. This might be because there is an existing DZN or DML file that is "Read-only" and therefore can't be accessed. In this case you should empty the TEMP folder and try again.
In general, you will need to browse to C:\Users\[your login name]\AppData\Local\Temp\ and delete all the files in the Temp folder (which is a good thing to do periodically anyway).
To empty your Temp folder:-
1. Close IRRICAD.
2.Browse to C:\Users\(Your login name)\AppData\Local\Temp. Note that if you can't see the "AppData"folder follow the forum post viewtopic.php?p=1423#p1423 to enable hidden folders.
2. Select all the contents and press the Delete button on the keyboard. Note that any programs that are currently running won’t allow their in-use temporary files to be deleted, which is fine in this case. Simply select "Skip" and enable "Do this for all current items".
If the issue persists please let us know.
The IRRICAD Team
-
marcioagr
- Posts: 59
- Joined: Sun Aug 23, 2020 7:07 am
- Company: Autônomo
- City / Town: Pratos de Minas
- Product: Irricad Standalone
Re: Warning IDE_DES 400
OK!
I did it here as described and everything went well!
thank you very much!
I did it here as described and everything went well!
thank you very much!