Irricad

We have a new computer, running v13, and are trying to move all labels and 'keywords' to the new computer. We are missing a couple that were given to us at a training, we believe. Is there a way to transfer all of the 'keywords' to the new computer or are they on an update? We are missing NOMLARGEFL...

We are trying to create a new symbol by importing a picture and saving it as a drawing symbol. It will save as a symbol in the file I am working in and I can 'draw the symbol' in the file before closing, but if I close out and try to load it into a new file, Irricad crashes/Stops working. Is it poss...

We are trying to get flushing to work on a pivot corner measuring 1200' x 850', submain is on the 1200' side and the flushline is around the radius of the pivot. Longest tapes are 850' and the shortest are 30'. In the tape block entity flushing tab the flushline is split in two by checking the even ...

We have changed the iteration number and still get the same message. In regards to the Zone Irrigation Flow, we have done flushing on a couple of designs and that number has never matched the Manifold Flushing Total Flow, sometimes it appears to be off by rounding errors, but this time it is off by ...

The number of laterals in the block is 131. The pressure is 13 as is the D/S pressure. Back pressure is set to 3 and the minimum flushing velocity is 1. We tried making the changes, but it did not fix the problem. We are also getting an error of too low of flow on a control valve. On the Flushing V1...

We are trying to calculate flushing on a field with 990 DripNet PC 18mil .16emitter on 27" spacing. Run length is 1,949' and we are getting an iteration error DES 557, stating that our run length is too long and that we need to shorten and rerun calculations. The Flushing v13 report shows that ...

We imported boundary and contours from an .shp file and then also imported a google image. We need to section of a portion of the field for tape to run a different direction, so we drew a poly line across the area, crossing the boundary lines, that have been changed to a drawing layer, but the seed ...