zone design summary
-
Hector
- Posts: 5
- Joined: Fri Apr 05, 2019 8:33 am
- Company: Olivos spa
- City / Town: Rengo
- Product: Irricad Standalone
zone design summary
can you add to the zone design summary report the area of each zone?
-
jovivier
- Site Admin
- Posts: 919
- Joined: Thu Mar 12, 2009 2:57 pm
- Company: Lincoln Agritech Ltd, IRRICAD Software
- City / Town: Lincoln
- Location: Canterbury, New Zealand
- Contact:
Re: zone design summary
Dear Hector,
Yes, the area can be added to the Zone Summary report, however the field will only be populated if the zones uses an Irrigation Area. Note that Irrigation Blocks inherently contain an Irrigation Area.
As there is no written help for the Report Editor it is best if we do this for you. Please confirm if you would like this option added to the standard Version 17 Zone Design Summary Report.
Note that as report customisation is outside of normal priority support we can only do this as time, and prior commitments, allows.
The IRRICAD Team
Yes, the area can be added to the Zone Summary report, however the field will only be populated if the zones uses an Irrigation Area. Note that Irrigation Blocks inherently contain an Irrigation Area.
As there is no written help for the Report Editor it is best if we do this for you. Please confirm if you would like this option added to the standard Version 17 Zone Design Summary Report.
Note that as report customisation is outside of normal priority support we can only do this as time, and prior commitments, allows.
The IRRICAD Team
-
jovivier
- Site Admin
- Posts: 919
- Joined: Thu Mar 12, 2009 2:57 pm
- Company: Lincoln Agritech Ltd, IRRICAD Software
- City / Town: Lincoln
- Location: Canterbury, New Zealand
- Contact:
Re: zone design summary
Hi Hector,
I have added an Area field to the Zone Design Summary Report. You can download it from http://www.irricad.com/Irricad/Download ... M_AREA.zip . Save the zip file to your hard-drive and extract the .FPC report file to your installed IRRICAD Reports folder, commonly located at C:\Program Files\AEI Software\Irrricad Pro 16\Reports or for a new install of Version 17 in C:\Program Files\Irricad\Irrricad Pro 17\Reports.
Restart IRRICAD and you will now see the "Zone Design Summary w Area" report in the list.
The IRRICAD Team
I have added an Area field to the Zone Design Summary Report. You can download it from http://www.irricad.com/Irricad/Download ... M_AREA.zip . Save the zip file to your hard-drive and extract the .FPC report file to your installed IRRICAD Reports folder, commonly located at C:\Program Files\AEI Software\Irrricad Pro 16\Reports or for a new install of Version 17 in C:\Program Files\Irricad\Irrricad Pro 17\Reports.
Restart IRRICAD and you will now see the "Zone Design Summary w Area" report in the list.
The IRRICAD Team
-
jabesmedeiros
- Posts: 60
- Joined: Tue May 27, 2014 2:47 pm
- Company: IPÊ Proyectos de Riego e Ingeniería
- City / Town: Temuco
- Product: Irricad Standalone
- Contact:
Report Models and the Head Loss Summary
Dear Jo.
How are you? I hope you are fine together with your relatives! I would like to present a request for the report models. Sometimes the institutions or clients that revise my projects require the head loss summary for each system flow. But I have not been able to create or obtain this kind of summary. Would it be possible to create this kind of mainline report? By the way I would like very much to create new reports. I have been able to do so at a limited extension. But If I had a report editor manual, I believe I could create interesting reports. And surely, I would have no problem on sharing them with you. Thank you for the response.
Sincerely yours.
Jabes Medeiros.
How are you? I hope you are fine together with your relatives! I would like to present a request for the report models. Sometimes the institutions or clients that revise my projects require the head loss summary for each system flow. But I have not been able to create or obtain this kind of summary. Would it be possible to create this kind of mainline report? By the way I would like very much to create new reports. I have been able to do so at a limited extension. But If I had a report editor manual, I believe I could create interesting reports. And surely, I would have no problem on sharing them with you. Thank you for the response.
Sincerely yours.
Jabes Medeiros.
Jabes Medeiros
Equipo de Soporte LA
IRRICAD.
Equipo de Soporte LA
IRRICAD.
-
jovivier
- Site Admin
- Posts: 919
- Joined: Thu Mar 12, 2009 2:57 pm
- Company: Lincoln Agritech Ltd, IRRICAD Software
- City / Town: Lincoln
- Location: Canterbury, New Zealand
- Contact:
Re: zone design summary
Hi Jabes,
Unfortunately there is no help manual for the Report Editor and therefore we offer to do the report modifications. Note that modifying reports is outside of our normal priority support offering and is only undertaken as time, and current commitments allow. Depending on the required changes there may be a charge for the customisations.
Regarding a summary of the combined total of the mainline headlosses per system flow, it is possible to report the pressure differential between the water supply and each valve, however this would work on single water supply systems only.
The IRRICAD Team
Unfortunately there is no help manual for the Report Editor and therefore we offer to do the report modifications. Note that modifying reports is outside of our normal priority support offering and is only undertaken as time, and current commitments allow. Depending on the required changes there may be a charge for the customisations.
Regarding a summary of the combined total of the mainline headlosses per system flow, it is possible to report the pressure differential between the water supply and each valve, however this would work on single water supply systems only.
The IRRICAD Team