Travel time report

[marcioagr]

Hi!
I need to calculate the travel time to inject fertilizers into my irrigation project.
I checked here and I don't have this specific report.
I would like to know if you can send this file to calculate the travel time.

Thank you!

[Hutch]

What version of IRRICAD do you have?

[marcioagr]

Ok!
Irricad 18.06

[Hutch]

Do you have the report shown in this image? If not, check your settings for the reports path to make sure that the reports path is to the version 18 reports.

[marcioagr]

It's ok!
Thank you!

Happy New Year!

[marcioagr]

One more question.......
How to export data to excel?

[Hutch]

I don't know of a direct route to Excel. You can save the report to a .txt file and then manipulate the report in Excel.

[marcioagr]

It's ok!
Great.

[jovivier]

Reports can be exported directly to Excel by editing the "Report Options" and adding #CSV#. Typically, we remove things like headers and footers and ensure that the data lines up in the correct order in the export. There are already many default reports that we have made available to export directly to CSV file format however the travel time reports are not currently available.

The exportable standard reports that are currently available can be downloaded from https://www.irricad.com/irricad/downloa ... plates.zip .
Extract the FPC files into your IRRICAD \Reports folder, commonly located at C:\Program Files (x86)\AEI Software\IRRICAD Pro xx\Reports or C:\Program Files (x86)\Irricad\IRRICAD Pro xx\Reports.
Restart IRRICAD to see the new reports in the Reports menu.

The IRRICAD Team

[marcioagr]

Ok Jo Vivier!
Thanks again for the feedback and for the files sent.

Thank you very much.

[leonardobb9]

Hi there,

I upgraded my version to V19.

Tried to print the travel time report (extremely useful btw) but it always states 0 seconds.

I ran the detailed analysis in the system.


Yours Sincerely,

Leonardo Bonatti

[jovivier]

Hi,

Did you first turn on "Calculate Travel Times" in Design|Design Parameters - Misc Parameters? Then re-run Analysis / Detailed Analysis.

This setting is off by default because on large designs it can slow down the processing speed.

The IRRICAD Team