Difficulty reading design file

Agri-Valley · Post by **Agri-Valley** » Tue Oct 21, 2014 9:49 am

When running any Zone Design I get two warnings: IDE_DES_445: Difficulty Reading temporary zone design file and IDE_DES_401: Difficulty reading design file. I have tried repairing the drawings and restarting IrriCAD.

Post by **jovivier** » Tue Oct 21, 2014 10:05 am

One cause of this message can be that not all the zones are on for processing and IRRICAD has lost the previous information from the zones that are currently not being processed. To fix turn all zones on for processing in Design|Zone Design Configuration. Then run Zone Analysis. Now you can turn off the required zones again.

Agri-Valley · Post by **Agri-Valley** » Thu Mar 19, 2015 9:52 am

Thank you. Your comment helped. I run into this typically with larger designs when I am isolating blocks to fine tune the design.

Irricad

Difficulty reading design file

Difficulty reading design file

Re: Difficulty reading design file

Re: Difficulty reading design file