Difficulty reading design file

Post any bug reports here, but please read the "Reporting Bugs" thread before posting.
Post Reply
Agri-Valley
Posts: 12
Joined: Thu May 15, 2014 6:56 am
Company: Agri-Valley Irrigation, Inc.
City / Town: Fresno

Difficulty reading design file

Post by Agri-Valley »

When running any Zone Design I get two warnings: IDE_DES_445: Difficulty Reading temporary zone design file and IDE_DES_401: Difficulty reading design file. I have tried repairing the drawings and restarting IrriCAD.
User avatar
jovivier
Site Admin
Posts: 919
Joined: Thu Mar 12, 2009 2:57 pm
Company: Lincoln Agritech Ltd, IRRICAD Software
City / Town: Lincoln
Location: Canterbury, New Zealand
Contact:

Re: Difficulty reading design file

Post by jovivier »

One cause of this message can be that not all the zones are on for processing and IRRICAD has lost the previous information from the zones that are currently not being processed. To fix turn all zones on for processing in Design|Zone Design Configuration. Then run Zone Analysis. Now you can turn off the required zones again.
Agri-Valley
Posts: 12
Joined: Thu May 15, 2014 6:56 am
Company: Agri-Valley Irrigation, Inc.
City / Town: Fresno

Re: Difficulty reading design file

Post by Agri-Valley »

Thank you. Your comment helped. I run into this typically with larger designs when I am isolating blocks to fine tune the design.
Post Reply