IRRICAD Releases the Pivot Module for IRRICAD Standalone V21
Posted: Tue Feb 27, 2024 12:24 pm
Pivot Module
This companion product has been developed to include the theoretical design and analysis of center pivots. This module is currently available as an add-on to IRRICAD Standalone Version 21. (We hope to release a Pivot module for IRRICAD Link V21 mid-2024).
- Create full or part circle center pivots in an IRRICAD design complete with wheel tracks and pivot arm via the click of a button.
- Specify the required spans, minimum outlet pressure, and application requirements in a comprehensive but easy-to-use dialog .
- An exclusive water source and pumps can also be created for the pivot if required.
- Analyze the pivot based on the dialog specifications and the current position of the pivot arm. This can easily be moved to see the results in different positions.
- Additional specific pivot maps have been included to display pivot-specific information about the pivot area such as gradient, angle, and twist of the pivot arm, and outlet ground clearance along the spans.
Download the flyer from https://www.irricad.com/irricad/downloa ... lyerA4.pdf.
The Pivot module is free for IRRICAD Standalone V21 users to trial until 31st May 2024. To continue using the Pivot capability after this date purchase the companion module from your local IRRICAD distributor.
For existing IRRICAD Standalone V21 users download the v21.28 patch as per the instructions below.
For those running older versions please contact your local distributor to purchase the upgrade to IRRICAD Version 21.
For IRRICAD Link users please note that the Pivot module is scheduled for release mid-year.
Patch v21.28
See https://www.irricad.com/Irricad/Downloa ... Readme.txt for more information.
To apply the upgrade go to Help|Check for Updates in IRRICAD V21 and then to proceed click [Next]. The upgrade will be downloaded and installed.
If there are any issues with the auto-update, or if IRRICAD 21.08 / 21.10 / 21.11 says there are no updates, then go to from https://www.irricad.com/upgrades-patche ... tandalone/ and follow the instructions to download the V21 Installation file for Standalone.
The IRRICAD Team
This companion product has been developed to include the theoretical design and analysis of center pivots. This module is currently available as an add-on to IRRICAD Standalone Version 21. (We hope to release a Pivot module for IRRICAD Link V21 mid-2024).
- Create full or part circle center pivots in an IRRICAD design complete with wheel tracks and pivot arm via the click of a button.
- Specify the required spans, minimum outlet pressure, and application requirements in a comprehensive but easy-to-use dialog .
- An exclusive water source and pumps can also be created for the pivot if required.
- Analyze the pivot based on the dialog specifications and the current position of the pivot arm. This can easily be moved to see the results in different positions.
- Additional specific pivot maps have been included to display pivot-specific information about the pivot area such as gradient, angle, and twist of the pivot arm, and outlet ground clearance along the spans.
Download the flyer from https://www.irricad.com/irricad/downloa ... lyerA4.pdf.
The Pivot module is free for IRRICAD Standalone V21 users to trial until 31st May 2024. To continue using the Pivot capability after this date purchase the companion module from your local IRRICAD distributor.
For existing IRRICAD Standalone V21 users download the v21.28 patch as per the instructions below.
For those running older versions please contact your local distributor to purchase the upgrade to IRRICAD Version 21.
For IRRICAD Link users please note that the Pivot module is scheduled for release mid-year.
Patch v21.28
See https://www.irricad.com/Irricad/Downloa ... Readme.txt for more information.
To apply the upgrade go to Help|Check for Updates in IRRICAD V21 and then to proceed click [Next]. The upgrade will be downloaded and installed.
If there are any issues with the auto-update, or if IRRICAD 21.08 / 21.10 / 21.11 says there are no updates, then go to from https://www.irricad.com/upgrades-patche ... tandalone/ and follow the instructions to download the V21 Installation file for Standalone.
The IRRICAD Team