Friday afternoon job for Dan
Maybe not this Friday......
Pipe Pressure Temprature Derating
-
Gennaro Vellotti
- Posts: 51
- Joined: Wed Oct 14, 2009 3:28 pm
- Company: Netafim Australia & New Zealand
- City / Town: Adelaide
- Location: Adelaide, Australia
- Contact:
Pipe Pressure Temprature Derating
Would be nice to see the ability to add either to the database or design parameters (or both) the ability to derate Pipe PN class due to different water or surface temperatures. It could be something you check in database to use this feature then, add pressure rating at different temperatures. May also require a temp setting in Design parameters (seperate to viscosity or tied into viscosity).
Friday afternoon job for Dan
Maybe not this Friday......
Friday afternoon job for Dan
Maybe not this Friday......
Gennaro Vellotti
Irrigation Engineer Lead
Netafim Australia/NZ
+61 419 362 845
Irrigation Engineer Lead
Netafim Australia/NZ
+61 419 362 845
-
kasrarezaie
- Posts: 17
- Joined: Sun Dec 20, 2009 2:33 pm
- Company: 1
- City / Town: kerman
Re: Pipe Pressure Temprature Derating
Hello
It seems to be designed for the pressure and flow capacity should be calculated. Looking for a better way to be due to geographical location and environmental conditions designed to calculate the correct temperature., And then you have the effect of temperature on the viscosity and the viscosity of the hydraulic parameters (n, c, etc) to considerable. In any case, this is a good idea for the calculations in a specific spot.
It seems to be designed for the pressure and flow capacity should be calculated. Looking for a better way to be due to geographical location and environmental conditions designed to calculate the correct temperature., And then you have the effect of temperature on the viscosity and the viscosity of the hydraulic parameters (n, c, etc) to considerable. In any case, this is a good idea for the calculations in a specific spot.